Showing posts with label brake. Show all posts
Showing posts with label brake. Show all posts
Monday, February 2, 2015
Above 50 km hour Do not Rely Rear Brake
Dian Dilato , Motorsport Safety Riding Instructor , provides input on how to master the motorcycle , especially to moge . There are various techniques that need to be understood in order to control this great man . One of them is the brakes ."Ninety percent , front brake . Above a speed of 50 km / h , the rear brake is forbidden to be used , " beber Dian Dilato .
Dian also explained that the reason for this can be seen directly by naked eye on a motorcycle . He said that there might be an engineer to design the brake arrangement such that if it does not conform to the anatomy and motion of the human body .
" ( Disc brake front ) 34 mm , two seeds . Piston disc one there are 2 , so two times four . Rear , only 16 mm , single piston . Means that the rear brakes ( only instrumental ) 20 percent , " he said , referring to Ducati monster that he made an example of .
The comparison shows that the motor designer would strengthen the procurement function for the front brakes . Dian then give another analogy to illustrate the power of kicks and punches , further to explain the difference in leg strength and power in the hands .
" Mukul or kicking , which toned ? Without realizing it , will be much faster kick . If there is an accident , we see the scene , no tire gesrot . Meaning he used the rear brake , he slides , " he said , citing information on motorcycle accidents often occur as a result of using the brakes .
Thursday, January 29, 2015
DIY Replace the Brake Lining
1). The first stage, of course, remove the tire first. Continued, removing the hooks lining the front using a flat-head screwdriver. By way gouged out, then pulled by hand.
2). Furthermore renggangkan brake surface using flat-head screwdriver. Insert the screwdriver into the sidelines calipers, so that the canvas is no longer attached to the disc-disc adhesion.
3). 2 Open the rear caliper bolts, using a 7 mm L key. Do not forget to remove the protective bolt also yaa ...
4). Next, remove the canvas in a way drawn to the back or attached to the caliper first, followed by the front.
5). Finally, attach the new front brake first, followed side that attaches to the rear calipers.
Thursday, January 8, 2015
Sensing Automatic Brake Technology in Mazda 6
One key to safe driving is a braking system that serves to reduce vehicle speed. Mazda Motor show off the sophistication of the Smart City Brake Support (SCBS), belongs to the Mazda6 sedan, which could help the braking in the demonstration session on the sidelines of a media test drive. An accident between a car from behind while pass-traffic is common, Mazda revealed that the incident occurred at 60 percent below the speed of 30 kph. SBCS is a feature that can be useful to avoid such things, help the driver avoid the collision front.
Product Planning and Marketing Mazda Motor, said SCBS will work at the speed of 4-30 kph. If it is not turned off (from one of the modes in the instrument cluster), SBSC function is always active. Detection system works automatically from infrared-based sensors that are in the glass, in the middle of the rear view mirror.
When tested, the car drove toward the rear obstacle likened the car, on the condition that the driver should not hit the brakes to stop. Evidently, after the sensor to calculate and make decisions, the brake will be active approximately one meter of the barrier object. Cars "forced" perfect stop but will resume running after four seconds. Detected object is approximately higher than the hood, there is a possibility that under it unreadable.
we prove himself on the way, When creeping in congestion, a motorcycle decided to suddenly cross in front of the car. SBCS was surprised because it was reading the movement as a potentially hazardous object, then the car was braked himself.
Subscribe to:
Posts (Atom)